If you own a Samsung Galaxy S20+ Plus SM-G985/F/DS smartphone and want to perform root and flash TWRP Recovery 3.4.0 on your device, then you have come to the right place. XDA senior member geiti94 has released a unified version of TWRP 3.4 for Samsung Galaxy S20 series smartphones. Please note that the TWRP flashing and rooting process will irreversibly disable the KNOX warranty bit, thus voiding the warranty and preventing you from receiving firmware updates, as subsequent OTA updates will be disabled.
If you are an Android enthusiast and want to do TWRP recovery on your beloved device, you have come to the right place. We will soon explain the process of installing TWRP and the rooting of the Samsung Galaxy S20+ Plus SM-G985/F/DS.
The Samsung Galaxy S20 is equipped with the Exynos 990 (7nm+) chipset – Global / Qualcomm SM8250 Snapdragon 865 (7nm+) – US, CPU / Octa-core (2×2) processor.Mongoose 73GHz M5 and 2×2.50GHz Cortex-A76 and 4×2.0GHz Cortex-A55) – Global / Octa-core (1×2.84GHz Cryo 585 and 3×2.42GHz Cryo 585 and 4×1.8GHz Cryo 585) – US, Mali-G77 MP11 GPU – Global / Adreno 650 – US, 6.7 screen, 108.0 cm2 (~90.5% screen to body ratio), 2X dynamic AMOLED, 120Hz, HDR10+, 1440 x 3200 pixels, 20:9 aspect ratio (~525 ppi density), Corning Gorilla Glass 6, 128GB internal memory / RAM 8GB RAM, 12MP quad head camera, f/1.8, 26mm (wide angle), 1/1.76in, 1.8µm, Dual Pixel PDAF, OIS / 64MP, f/2.0, 29mm (telephoto), 1/1.72in, 0.8µm, PDAF, OIS, 1.1x optical zoom, 3x hybrid zoom / 12MP, f/2.2, 13mm (ultra wide angle), 1.4µm, Super Steady Video / 0.3MP, 3D TOF, f/1.0, (depth), 10 MP car camera, f/2.2, 26mm (wide), 1/3.2″, 1.22µm, Dual Pixel PDAF, 4500mAh Li-Po battery, non-removable, Qi/PMA 15W wireless fast charge, 4.5W wireless inverse charge.
The TWRP is characterized by its material design and attractive user interface (UI). If you follow this manual, you can install the latest version of the TWRP for the Samsung Galaxy S20+ Plus SM-G985/F/DS. You can download TWRP Recovery from the links in the example section of this article. Please note that this is an official TWRP recovery and only for the Samsung Galaxy S20+ Plus SM-G985/F/DS (Confirm the model by going to Settings > Startup). The procedure described below is for installing TWRP on the Samsung Galaxy S20+ Plus SM-G985/F/DS only, do not try this method on any other device.
If you want to exploit the full potential of your Samsung Galaxy S20+ Plus SM-G985/F/DS hardware, the most important task is to take root and do a TWRP. Exchange ROMs often have limited and unsupported customization options. If you have a root device and a flash TWRP recovery, you can install all custom ROMs, modules, kernels, Xposed, etc., as well as many applications that need root access to function properly.
ALWAYS DELETE how to run the HTC 825 and install TWRP Recovery.
Brief information and benefits of TWRP recovery
The TWRP (Team Win Recovery Project) is an open source community development project. With the flashing TWRP your device can install any firmware, start your smartphone, change zip files for settings, Xposed modules for settings, root and unroot processes in one click. You can also make a full backup of Nandroid and restore it later, flash the image file with a single click, remove bloatware, overclock and underclock. The TWRP allows you to easily erase, cache and delete data after flashing an image file to display changes and correct minor errors caused by caching.
To install TWRP, your Samsung Galaxy S20+ Plus SM-G985/F/DS phone must have an unlocked startup charger. This means that you first need to unlock the bootloader to install the root of the device, as well as to perform any configuration.
Disclaimer : While AndroidWeblog.com covers everything very clearly, so that our readers get exactly what they want, there is still a modest chance that the steps mentioned here will cause major problems. It is therefore in the user’s interest to take great care in preventing accidents with the device.
Installing a custom ROM firmware and flashing it will definitely void your device’s warranty and AndroidWeblog.com cannot be held responsible for invalid warranties or limited devices.
Condition
Check the model number, which must be stated:
- Samsung Galaxy S20 [Models : [SM-G985, SM-G985F, SM-G985F/DS] Android 10 One UI 2.0
Please read the disclaimer carefully before using your phone regularly and agree to continue to take this risk.
READ also how to root Oppo Neo 7 A33f and install TWRP Recovery.
The phone must be 70% charged, otherwise complications may occur during the experiment. Why take the risk of trying to fully charge it.
If you’re installing a root of your phone or a custom ROM, it’s good practice to back up your phone. Back up all your media such as photos, videos and everything else on your PC and your contacts in the cloud.
You need to enable the USB debugging option by going to Settings, Applications, and Developer Options.
Root Downloads Samsung Galaxy S20+ Plus SM-G985/F/DS Android 10 One UI 2.0
Download Samsung drivers here (if you already have drivers installed on your PC, ignore this).
Download Odin from here.
Download here the TWRP recovery for the Samsung Galaxy S20+ Plus SM-G985/F/DS :
TWRP Recovery 3.3.1-0.
TWRP Recovery 3.4.0
(S20/S20+/S20 Ultra (Exynos variants))
Download SuperSU via Chainfire from here.
Download Magisk Manager from here.
Steps to flash/install TWRP on the Samsung Galaxy S20+ plus SM-G985/F/DS Android 10 One UI 2.0
Step one: First enable USB debugging on your device. To enable USB debugging, simply enter the Developer setting. Go to Settings>About Phone> and type the house number 7-8 times until the message Developer Enabled appears. Once the development options are active, you can go back to Settings> Development Options> Enable USB Debugging.
Step two: Suppose you have already downloaded the latest Odin and TWRP recovery for your device from the preview area above. If the latest version of Odin does not work on your device or if you have problems, just download the correct version of Odin.
Step three: Make sure you have already downloaded TWRP Recovery for your Samsung device. Just unpack the compressed Odin file on your computer and install the latest Samsung USB drivers on your computer.
Step four: Once the device is turned off, simultaneously press the Power+Volume down+Home keys and the device enters the start-up mode. If this key combination does not work for your device, you can just use Google.
Step five. Now connect your Samsung device to your computer using a USB cable. Then navigate to the folder where the Odin files were extracted and right click on the Odin executable file and then click Run as Administrator.
Step six: The interface should display something like ID:COM below, and check the interface below carefully.
Step seven: Note the ID:COM and the empty field below, which turns blue as soon as the device is detected. The device should be detected when the correct drivers are installed on the computer.
ALWAYS know how to install the Oukitel K7 Power root and TWRP recovery.
Step 8 : Then just click AP, go to the firmware archive, find the .tar.md5 file and select it after clicking AP.
Pay attention: There’s a PIT zone in the area. Do not put a file in the PIT section and make sure that redistribution is not enabled. Tick the box and place a check mark next to Auto-Restart and F. Reset Time.
Step 9 : Once the TWRP file (.img) has been uploaded to the AP field, the process can start flashing or installing. Be careful not to touch the USB cable while flashing.
Step 10 : If all goes well, you will see a green PASS or RESET message at the end indicating that the TWRP firmware process for your device has been successfully completed and that it now has a TWRP recovery function. At this point, the device will restart automatically, don’t panic, it’s normal. You can now disconnect the device from the computer.
Procedureto install the Samsung Galaxy S20+ plus SM-G985/F/DS on Android 10 a 2.0/ Magisk or SuperSUuser interface
Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then go through the steps.
Pay attention: You can use Magisk Manager or Super SU, but only one, so choose well. If you’re not sure, go to Magisk Manager.
Step one: Move the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of your Samsung Galaxy S20+ Plus SM-G985/F/DS smartphone.
Step two: Now all we have to do is start the recovery. You can also back up the ROM via the TWRP interface. However, I recommend making a backup copy of the ROM. Because if the process fails, you can make the ROM blink.
Step three: Press Install and then navigate to SuperSU.zip or magisk.zip and drag the firmware confirmation file (at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds.
Congratulations, you have now installed the Samsung Galaxy S20+ Plus SM-G985/F/DS and the TWRP is unlocked. You can now install Xposed Framework and customize your smartphone. If you want to check this, you can download the root status and check it through the Root Checker application.
Related Tags:
super force 82 lite plus,lining windstorm 72 vs 78,lining air force 78 review,best li-ning badminton racket 2020,top 5 yonex badminton rackets 2019,li-ning windstorm 500 review,li-ning woods n80,li-ning air force 79 review,windstorm 75 review,li-ning windstorm 78+,yonex voltric 0 f,lining windstorm 74,lining windstorm 700,windstorm 300,windstorm badminton racquet,lining windstorm 72 black,lining windstorm 700 iii specifications,aypm204 1,windstorm 700iv,yonex latest badminton racket 2020,best badminton racket for doubles 2020,yonex voltric z force ii,best badminton racket under rm200,yonex carbonex 8000 plus badminton racket,most expensive badminton racket in the world,yumo li ning,lining 4u rackets,li-ning badminton grip,li-ning badminton racket windstorm 78sl review,li-ning windstorm 72,li-ning windstorm 78 price,li ning badminton rackets catalogue,li-ning website badminton
