DriverFix helps you to automatically update drivers and prevent PC damage caused by installing the wrong driver versions.
5. Start the DISM
The standard method
- Right-click on Start and open the command line (Admin).
- Type the following command and press the Enter key :
- DISM /Online /Cleanup-Image /RestoreHealthError
- Wait for the scan to complete.
- Restart your computer and try the update again.
The last debugging tool we will use is DISM. This tool is more powerful than the previous two because it again provides the system image.
Using Windows installation media
- Insert the Windows installation media.
- Right-click in the Start menu and select Command Prompt (Admin).
- On the command line, type the following commands and press Enter after each command :
- Delete/stop/clean up images/scanning
- Disassemble/Disassemble/Clean/Restore
- Now type the following command and press the Enter key :
- DISM/Online/Cleanup-Image/RestoreHealth/source:WIM:X:SourcesInstall.wim:1/LimitAccess
- Be sure to change the X value for the mounted drive letter when you install Windows 10.
- Restart the computer when the process is complete.
6. Remove anti-virus software
Error: The file name is not specified.
Third-party applications can cause such errors, especially if they are not compatible with your PC.
To correct these errors, you must find and remove the problematic software, and very often your antivirus or firewall may be the cause.
Although antivirus programs are important for your safety, it is advisable to remove them completely to fix this error.
Uninstalling your antivirus program may not fix this error, as many antivirus programs tend to leave files and registry entries behind after they are deleted.
According to reports, these files can also cause the SYSTEM_PTE_MISUSE Blue Screen of Death error, so it is important to remove them.
This can be done manually, but it is a time-consuming and difficult task, so it is best to use a special removal tool. Many antivirus companies offer these tools as downloads on their websites.
7. use the protected mode
- Hold down the Shift key on your keyboard and click Restart. You can also restart the computer several times during the boot process to start an automatic recovery.
Error: The file name is not specified. - Select Troubleshooting > Advanced Options > Startup Options.
- Click on the “Restart” button.
- When the computer reboots, a list of options appears. Select network safe mode by pressing 5 or F5.
- Your computer goes into secure mode.
When you start safe mode, Windows 10 uses only the default applications and drivers. Therefore, check if the error SYSTEM_PTE_MISUSE occurs again.
If the BSoD error does not appear, it means that it is caused by a third-party application or driver that you have installed, and you can use Safe Mode to remove the software in question.
As mentioned above, these errors can be caused by software, such as third-party applications or even drivers.
If you get the error SYSTEM_PTE_MISUSE, it is recommended to boot the PC in secure mode. To get into secure mode, follow the steps described above.
8. overclocking or underclocking randomly accessible memory
Error: The file name is not specified.
Apparently there are problems with some RAM modules, and if this error appears on your computer, you may need to check your RAM settings.
According to users, some RAM modules use 1600MHz by default, but it seems that some motherboards cannot support this frequency, and this is the reason for the SYSTEM_PTE_MISUSE error.
To correct this error, users recommend unlocking the RAM modules and changing their frequency to 1333 MHz.
You can also keep the default frequency, but then you have to increase the RAM voltage from 1.5 V to 1.6 V.
Most of these changes can be made directly from the BIOS. However, we must warn you that overclocking and underclocking can be potentially dangerous and cause permanent damage to your PC if you are not careful.
If you decide to overclock or underclock your RAM, you do so at your own risk.
Does BIOS access seem too complicated to you? Check out this great guide for more help!
9. Check the hardware and clean the computer of dust.
Error: The file name is not specified.
SYSTEM_PTE_MISUSE and many other BSoD errors can be caused by your hardware, so you should check that it is working properly.
Often these errors are due to faults in the RAM. It is therefore recommended to check the RAM modules individually. If you want to perform a detailed scan, we recommend using a special tool.
It should also be noted that sometimes it is sufficient to reset the RAM modules to correct this error. If your computer is full of dust, we recommend cleaning it with a compressed air nozzle.
In addition, dust can get into the motherboard slots, causing the PC to stop recognizing certain hardware. This can be remedied by cleaning the dusty slots with compressed air.
The SYSTEM_PTE_MISUSE Blue Screen of Death error can cause many problems, but this error can be easily corrected by replacing or under-activating the faulty RAM.
If that doesn’t work, you can also try other solutions from this article and let us know what worked for you in the comment section below.
FAQ: Learn more about the “Blue Screen of Death” error.
- What is an error message on a blue screen in Windows 10?
Read this main article on BSoD error correction to learn all about it.
- Can a faulty motherboard cause a BSOD?
Yes, a faulty motherboard can cause such problems. Read our detailed article on motherboard problems to know all about it.
- Does the factory reset restore the blue screen of death?
There are better ways to solve the problem. Check out our short article with all the solutions you can try to solve the BSoD
Editor’s note: This article was originally published in June 2016 and revised and updated in February 2021 to ensure timeliness, accuracy and completeness.
Frequently asked questions
How can we fix the misuse of FTE?
CORRECTION: SYSTEM PTE MISUSE Blue screen error at … – wintips.org
How to fix the BSOD error?
Blue screen of death “BSOD” – What can you do to prevent it?
How do I fix the blue screen error in Windows 10?
How to find and correct errors in the Windows 10 blue screen …
Related Tags:
system_pte_misuse windows 10,system pte misuse reddit,kmode exception not handled,page fault in nonpaged area,system pte misuse windows 10 hp,kernel security check failure,system thread exception not handled,system pte misuse causes
