Discover 3 efficient solutions to get Android out of fast start mode!

Revision: Is your Android phone locked in fastboot mode? You don’t know how to get out of fastboot mode on Android? Don’t worry about it. This article provides effective solutions to help you fix your Android device stuck in quick start mode. Just read the article and follow the solutions to stop fastboot mode on Android.

Let’s start with a practical and real use case!

Practical scenario: LG G5 user locked in quick start mode and unable to reset factory settings

The LG G5 is locked in fastboot mode, it can’t go back to factory settings.

My LG G5 went into fastboot mode for no reason, one moment it was fine and the next time I took it out of my pocket it went into fastboot mode, I tried the following without success :

– The battery was removed, waited a minute and restored…., which opened on the home screen,

– Press and hold the Volume Down and Power button, go to the Reset function and press Yes to reset…..it, then return to the Home screen.

– Connected to the PC and entered CMD Fastboot on the device, the phone is recognized here,

– USB debugging probably won’t be enabled on my phone either.

– Is it a problem with the battery?

– Is there any way to reboot without wiping all the data, because I didn’t backup my phone because I didn’t expect this to happen!

I thank you in advance for your help.

Source : Android Central Forums

As per the practice scenarios above, there are many Android phone users, especially Asus, Xiaomi, OnePlus, Samsung, Nokia, Infinix, Moto, Lenovo, LG, Huawei, HTC, Techno W4, RCA tablet and so on with the same problems with their phones.

So the question now is: how do I get out of Android Quickstart mode?

Well, we’ll move on to the solutions now, but before we do that we want to know – what is Fastboot?

Also read : Fixed: Error No command in recovery mode on Android.

What is FastBoot?

Fastboot is a protocol/tool that allows you to write data directly to the phone’s flash memory. In practice, it can be used to redo partitions, flash images such as recovery, boot loader, kernel and flash memory file system update on Android devices. You can also change your screensaver, restore nandroid backups and much more.

This is a small tool that comes with the Android SDK (Software Development Kit). It is also an alternative tool in recovery mode for installations and upgrades.

Not all phones have a quick-start mode. It is only enabled by default on Nexus devices and some other phones and tablets. For other Android devices, you must rotate the device to enter Quick Start mode.

Well, let’s go back to the topic and learn some effective solutions to fix the situation when Android is stuck in quick start mode.

Finally, here is the solution zone!

How do I get out of Android quick start mode? [Universal Solutions]

As mentioned earlier, this feature is not enabled by default on all Android phones and tablets, so most people won’t have to deal with it. This problem of the phone being locked in quick start mode usually happens to those who have turned on their phones.

However, if your Android phone is stuck in quick start mode, here we have some handy troubleshooting tips to help you get out of quick start mode on Android.

Message: The following solutions apply to all Android phones and tablets, such as Moto, Lenovo, HTC, Xiaomi, OnePlus, Samsung, Samsung Galaxy Note, Asus, Huawei, Nokia, Oppo etc.

Also read : To solve the system image, check the error on the camera phone

Solution 1: Try the quick troubleshooting first to exit the quick start mode.

  • Try restarting the device: One of the first steps is to reboot the device. Just turn the device off and on again.
  • Use the trick of the key: You can use the hardware buttons on your device to lock yourself into Android Quick Start mode. Here you have to press and hold the power button for 15 seconds, the device will vibrate once and restart.
  • Remove the battery: Then try removing the battery. Some phones are equipped with a removable battery and others with a removable battery. If your phone has a removable battery, simply remove it. If your phone does not have a removable battery, take it to your nearest service centre. After removing the battery, let it sit for a few minutes, replace it, and then start the device.

If the quick methods mentioned above don’t help, it’s time to take advanced measures.

Solution 2: Try different Android tools to get out of Android quick-start mode

Another solution you can try is to use Android Multi-Tool to get out of Android Quick Start mode.

Android Multi Tools v1.02b was developed by one of the members of the SE-Thailand GSM forum. That makes it useful for everyone. Besides professionals, ordinary users can easily use Android Multi Tools without any technical knowledge. Downloading and installing this program on a Windows PC is very simple.

So what are you waiting for, install it on your Windows computer and run the tool as administrator, connect a locked Android phone in fastboot mode, then follow the instructions to fix the problem?

That’s it!

Also read : Resolved: Android then starts releasing the Optimize application.

Solution 3: To exit Quick Start mode, use the Quick Start program and the minimum ADB.

Minimal ADB and Fastboot Tool is a very powerful software for all Android root users. This utility is designed to unlock the bootloader, perform custom repairs, flash custom ROMs, and use any third-party application in quick boot mode. Moreover, you do not need to install the SDK software on your Windows PC.

The best part about this minimal ADB tool is that you also get the ADB driver package that you need to connect your Android device to your Windows PC.

However, this is a PC solution that allows you to get out of quick start mode for Android phones or tablets and is a bit technical and complicated.

However, if you have technical knowledge or are an advanced user, this is the easiest way to flash something on your Android phones/tablets and unlock the quick start mode.

You can do it yourself and easily take your Android out of quick start mode by simply following the steps below.

Message: USB debugging is not required.

Step one: The first step is to download and install Minimal ADB and Fastboot Tool on a Windows computer.

Step two: After installation, go to the installation folder – [adb installation location] : My Computer> Reader C> Programs> Communications folder].

Step three: Click anywhere in the adb folder, then hold down Shift + Right mouse button and select the option to open a command window here.

Step four: Connect your Android, which is stuck in quick start mode, to your computer with a USB cable.

Step Five: Once the device is connected, type fastboot devices in the command window and press Enter.

Message: If the above adb command does not display the serial number of your device, it means that your device is not recognized by the PC. In that case, you need to install the USB drivers and repeat the steps.

Step six: Finally, type the quick restart command and press Enter.

This will take your Android out of fastboot mode.

Solution 4: One-click solution to fix an Android device stuck in Quick Start mode

If all the above methods do not help you in fixing your phone in quick start mode, then it is highly recommended that you try the Android repair software.

With Android Repair Tool, you will get a definitive and efficient solution to remove your phone in quick start mode. It also fixes other Android system issues like phone stuck in black screen, Android update failure, applications that keep crashing, Android devices that are unresponsive or stuck, and most Android operating system issues.

Message: Android repair for Samsung Android phones now.

Follow the instructions below to fix your phone stuck in quick start mode with Android Repair.

Important Notice : Let me tell you that going out of fast boot mode with android repair software can lead to data loss. Therefore, it is highly recommended that you back up your phone data first.

You may also consult:

Steps to fix Android Quick Start Mode Blockage via Android Repair

Step one: Connect your Android to the PC

First, download and install Android Repair on your computer and run it.

Then select Restore from the available options.

Now connect your faulty Android phone or tablet to the computer and select Android Recovery from the available options.

In the next window, select the appropriate brand, model number, country/region and network operator. Then confirm the warning and click Next.

Android Repair can erase all data on your device. Simply enter 000000 to confirm continuation.

Message: It is highly recommended that you backup your Android data before recovering your Android with Android Repair Tool.

Step two: Restoring an Android phone to download mode

Before starting Android recovery, you need to start your Android device in download mode.

Follow the instructions below to start your Android phone/tablet in DFU mode!

For Android phone or tablet with home button:

  • Turn off the unit.
  • Press Home button + Power button + Volume down button for a few seconds (5-10 seconds).
  • Release all keys and press the Volume up key to enter boot mode.

For Android phone or tablet without home button:

  • Turn off the unit.
  • Press and hold the Power + Volume Down + Bixby buttons for a few seconds (5-10 seconds).
  • Release all keys and press the Volume up key to enter boot mode.

Then click Next. The software starts loading the firmware.

After downloading and checking the firmware, the software will automatically start repairing your Android device.

In just a few minutes, your Android phone or tablet will have all errors, bugs and system problems fixed.

Bonus: Recover lost data after repairing an android stuck in fast start mode

If you have lost important data on Android devices after locking Android in quick start mode but want to recover it, you are strongly advised to immediately try Android data recovery software, which is available for both Windows and Mac computers.

This Android data recovery software helps you recover files like photos, videos, audio files, messages, WhatsApp calls, call logs, contacts, notes, voice memos, documents and more.

Message: Stop using Android and do not enter any new data on the device, as this will overwrite existing files and reduce the chances of data recovery.

Here are the complete steps for recovering data from your Android phone or tablet.

Quick start mode Frequently asked questions (FAQ)

Question 1: How do I disable quick start mode on Android?

Answer: Follow the steps below to disable and exit quick start mode:

  • Press and hold the power key until the phone screen disappears or turns black. This can take up to 40-50 seconds.
  • The phone screen should turn off or disappear and it should reboot.

Question 2: What happens when my phone goes into boot mode?

Answer: When the phone goes into quick start mode, you will see that you have many options to execute. You can quick reboot, quick flash boot, quick flash unlock, wipe partitions, and more.

Question 3: Is the data erased with the erase command in fast charging mode?

Answer: Yes, of course, if you choose the Delete command, the data will be deleted. So be careful in your choice of command, and if you decide to run a delete command, save your Android first.

Question 4: How long does Quick Start last?

Answer: It depends. If it goes well, it only takes a few minutes. But if something goes wrong, the phone gets locked, and you don’t know how long it will stay locked.

Completion

So folks, these are effective solutions you can try to lock Android into fastboot mode. And I hope that one of the above solutions will definitely help you solve the problem.

Max Field is the founder of recoverandroid-data.com. He loves Android and likes to write tips, tricks, troubleshooting, data recovery solutions and other Android related stuff.

frequently asked questions

How do I remove the fault in quick start mode?

Just turn the device off and on again. Using hardware keys : You can even apply hardware dongles to lock yourself in fastboot android mode. Simply press and hold the power button for fifteen seconds. The unit vibrates once and restarts.

How do I get Android out of quick start mode?

Step one: So you need to download Reiboot for Android and install it on your computer. Then connect your Android device to your computer. Step two: Start the program and click the On-Click button to exit Quick Start mode. Step three: A message will then appear on the screen to indicate that you have left fastboot mode.

How do I switch from quick start mode to normal start mode?

This is a combined power and volume key that puts the phone into recovery mode. For this to work, you must press and hold the power button and the volume down button simultaneously. Hold it in your hands, your phone will reboot and you will see the Mi logo on your smartphone and the startup animation will begin.

how to close fastboot modeentering fastboot mode stuck samsungphone stuck in fastboot mode xiaomihow long does fastboot mode takehow to remove fastboot mode in tecno f1how to get out of fastboot mode in mifastboot mode androidhow to exit fastboot mode in neon ray

You May Also Like

6 Tips You Can Do to Increase Your Instagram Followers Fast

With billions of users worldwide, social media can be used as a…

MSI GS66 Stealth 10SE Laptop Review

MSI GS66 Stealth 10SE Laptop VS 1+ (1) alt=MSI GS66 Stealth 10SE…

Fix: Hulu Error Code p-dev322, p-dev329, p-dev323, p-dev302

Hulu is an American subscription service that offers video on demand at…

How to Install iPhone Drivers in Windows 10 (Automatic & Manually)

This tutorial will explain in detail how to install iPhone drivers in…