If you own the Samsung Galaxy S21+ Plus 5G SM-G996B/N smartphone and also want to customize this rugged smartphone, then you are on the right page. Senior member of XDA, afaneh92 for developing and implementing TWRP Recovery 3.5.0 for the Samsung Galaxy S21+ Plus 5G smartphone.  Although there were few errors at the time of publication of this manual. Haptic feedback does not currently work, while encryption works partially.

The Samsung Galaxy S21 Plus 5G features an Exynos 2100 chipset (5nm), octa-core CPU/Processor (1×2.9GHz Cortex-X1 and 3×2.80GHz Cortex-A78 and 4×2.2GHz Cortex-A55), Mali-G78 MP14 GPU, 6.7in, 107.8cm2 display (~88.)3), Dynamic AMOLED 2X, 120GHz, HDR10+, 1300 nits (peak), 1080 x 2400 pixels, 20:9 ratio (~394 ppi density), Corning Gorilla Glass Victus, Always-on display, internal storage/ RAM 128GB 8GB RAM, 256GB 8GB RAM, triple-sensor main camera 12MP, f/1.8, 26mm (wide-angle), 1/1.76 inch, 1.8µm, Dual Pixel PDAF, OIS / 64MP, f/2.0, 29mm (telephoto), 1/1.72 inch, 0.8µm, PDAF, OIS, 1.1x optical zoom, 3x hybrid zoom / 12MP, f/2.2, 13mm, 120˚ (ultra-wide-angle), 1/2.55 inch, 1.4µm, ultra-stable video, 10MP standalone camera, f/2.2, 26mm (width), 1/3.24, 1.22µm, dual PDAF pixels, 4800mAh lithium ion battery, non-removable, 25W fast charging, USB Power Delivery 3.0, 15W Qi/PMA fast wireless charging, 4.5W reverse wireless charging.

If you are an Android lover and want to root and restore TWRP on your beloved device, then you have landed on the right page. We will soon walk you through the process of installing TWRP and rooting the Samsung Galaxy S21+ Plus 5G SM-G996B/N. You should know that the TWRP process and firmware root will irrevocably disable the KNOX portion, voiding the warranty and preventing you from receiving firmware updates, as it disables subsequent OTA updates.

TWRP has an attractive hardware design and user interface (UI). If you follow this guide, you can install the latest TWRP for Samsung Galaxy S21+ Plus 5G SM-G996B/N. You can download TWRP Recovery from the links provided in the required section of this article. Please note that this is an official TWRP restore and is only for the Samsung Galaxy S21+ Plus 5G SM-G996B/N (Please confirm the model by going to Settings > About). The process described below is only for rooting and installing TWRP on Samsung Galaxy S21+ Plus 5G SM-G996B/N, do not try this method on any other device.

If you want to unleash the full potential of your Samsung Galaxy S21+ Plus 5G SM-G996B/N, then rooting and flashing TWRP is the most important task. Exchange ROMs often have limited and unsupported customization options. If you have a rooted device and a flashed TWRP recovery, you can install any custom ROM, modules, kernels, Xposed, etc, as well as many applications that require root access to function properly.

relevant website

How to root the Lenovo S5 K520 and install TWRP recovery

ALWAYS READ the root of the Samsung Galaxy A50s SM-A507 and install TWRP Recovery 3.4.0

22. July 2019

Brief information and benefits of TWRP recovery

TWRP (Team Win Recovery Project) is an open source community development project. Flashing TWRP allows you to install any firmware on your device, boot your smartphone, modify zip files for settings, Xposed modules for settings, root and uproot with one click. You can also make a full backup of Nandroid and restore it later, flash the image file with one click, remove bloatware, overclock and underclock. With TWRP, you can easily erase, cache and clear data after flashing an image file to reflect changes and correct minor errors caused by caching.

To install TWRP, your Samsung Galaxy S21+ Plus 5G SM-G996B/N phone must have an unlocked bootloader. This means that you first need to unlock the bootloader to root the device, and also perform a configuration.

Denial: Although AndroidWeblog.com covers everything very clearly so that our readers get exactly what they want, there is always a small chance that major problems may arise from the steps listed here. It is therefore in the user’s interest to carry out the steps very carefully in order to avoid accidents with the device.

Rooting and flashing a custom ROM will definitely invalidate your device’s warranty and AndroidWeblog.com cannot be held responsible in any way for invalid warranties or tinkered with devices.

Condition

Check the model number, which should be as follows:

  • Samsung Galaxy S21 Plus [Models : SM-G996B, SM-G996N] Android 11, One UI 3.1 [Exynos chip] [device code: t2s]
  • Country/Region : International/World

You should make sure you read the disclaimer carefully before you routinely use your phone and agree to continue taking the risk.

The phone must be 70% charged, otherwise complications may occur during the experiment. Why take the risk of fully loading it.

If you plan to root your phone or install a custom ROM, it’s a good idea to back up your phone. Back up all your media like photos, videos and everything on your PC, as well as your contacts to the cloud.

ALWAYS read the GT-I8552 learning curve for Samsung Galaxy Grand Quattro root/non-root

You must enable the USB debugging option by going to Settings, Apps and Development Options.

downloads for root Samsung Galaxy S21+ Plus 5G SM-G996B/N (t2s) Android 11, Single UI 3.1

Download the Samsung USB drivers here (if you already have drivers installed on your PC, you can skip this step).

Download Odin from here.

Download TWRP recovery for Samsung Galaxy S21+ Plus 5G SM-G996B/N here:

TWRP Repair 3.5.0 (Android 11 One UI 3.0)

(S21 Plus 5G Exynos variants)

Download SuperSU from Chainfire from here.

Download Magisk Manager from here.

You can download the .zip of ianmacd multidiscabler here (credits).

Steps to flash / install TWRP 3.5.0 on Samsung Galaxy S21+ Plus 5G SM-G996B/N (t2s) Android 11, Single UI 3.1

Supported: Samsung Galaxy S21+ Plus 5G Exynos Variant Models: SM-G996B, SM-G996N with Android 11, One UI 3.1)

Step one: First, enable USB debugging on your device. To enable USB debugging, simply enter the developer setting. Go to Settings>About Phone> and press the house number 7-8 times until Developer on appears. Once the developer options are enabled, you can go back to Settings> Developer Options> Enable USB debugging.

Step two: Let’s assume that you have already downloaded the latest versions of Odin and TWRP Recovery for your device from the sample area above. If the latest version of Odin does not work on your device or if you are experiencing problems, simply download the correct version of Odin.

Step three: Make sure you have already downloaded TWRP Recovery for your Samsung device. Then unzip the compressed Odin file on your computer and install the latest Samsung USB drivers on your computer.

Step four: When the device is turned off, press the ‘Power+Volume Down+Home’ buttons simultaneously and the device will enter the boot mode. If this key combination does not work for your device, search Google for this key combination for your device.

Fifth step. Now connect your Samsung device to your computer using a USB cable. Next, navigate to the folder where the Odin files were extracted and right-click on the Odin executable, then click Run as Administrator.

Step six: The interface should display something like ‘ID:COM’, and check the interface carefully below.

Seventh step: Note the ID:COM field and the empty field below it, which turns blue once the device has been detected. The device should be detected if the correct drivers are installed on the computer.

Step 8: Then just click on AP, then go to the firmware archive, find the .tar.md5 file and select it after clicking on AP.

Message: There is a PIT zone in the re zone. Do not place files in the PIT section and make sure repartitioning is not enabled. Check the box and place a check next to Automatic restart and F. Time reset.

Download A520FXXU6CRH1 for Samsung GALAXY A5 SM-A520F AUSTRALIA (VODAFONE)

Step 9: Once the TWRP file (.img) is uploaded to the AP area and the vbmeta_disabled_R.tar / multidisabler file is uploaded to USERDATA, the flash or installation process can begin. Be careful not to touch the USB cable while it is flashing.

Step 10: If all goes well, you will see a green PASS or RESET message at the end, indicating that the TWRP firmware process for your device has been successfully completed and that it now has TWRP Recovery. At this point the device will automatically reboot, don’t panic, this is normal.

Step 11: Now we have to disable the encryption. Go to Advanced > Terminal, type : Multidisciplinary. In the back cases, it may be necessary to reboot the multi-disk adapter. If the system indicates that there is free space on the device, it will try to resize the creator and ask you to restart the multidisc adapter. If this is the case, re-enter: multi-discretion. When the operation is complete, the message Done appears on the screen. Now go back to Clear > Format data > type yes. Now just reboot to recover.

You can now disconnect the device from the computer.

Procedure for Rooting Samsung Galaxy S21+ plus 5G SM-G996B/N (t2s) to Android 11, Single UI 3.1 – Install Magisk or SuperSU.

Make sure you have downloaded SuperSU or Magisk Manager (link in the required section of this article). Then continue with the next steps.

Message: You can use Magisk Manager or Super SU, but only one, so choose wisely. Go to Magisk Manager if you are not sure.

Step one: Transfer the downloaded SuperSU or Magisk Manager file to the internal memory / SD card of your Samsung Galaxy S21+ Plus 5G SM-G996B/N smartphone.

Step two: Just get started on the recovery. You can also make a ROM backup via the TWRP interface. However, I recommend that you make a backup copy of the ROM. Because if the process fails, you can flash the ROM.

Step three: Click Install, then navigate to the SuperSU.zip or magisk.zip file and drag the firmware confirmation file (located at the bottom of the screen). The Magisk/SuperSU flash process has started and will take a few seconds. Then select Reboot to restart the system.

Congratulations, you have now rooted the Samsung Galaxy S21+ Plus 5G SM-G996B/N and the TWRP is on. Now you can install Xposed Framework and customize your smartphone as you like. If you want to check it, you can download and check the root status through the Root Checker application.

You May Also Like

Stuck in a time loop

Virtual reality is finally getting the recognition it deserves. This year, Oculus…

Webcam is being used by another application windows 10 (5 solutions to apply)

After updating to Windows 10 version 20H2, several users report an error…

L2TP VPN issues [blocked / not responding]

Error: The file name is not specified. Milan Stanojevic – deputy editor-in-chief…

Windows 10 2004 black screen bug bothers some users to date

Most Windows 10 2004 users suffer from the fact that, without an…